Project 1 Result!

 Final result!!




Photos of armor being worn will be posted shortly!

Comments

Post a Comment

Popular posts from this blog

Final Project: Final Result

Image
Project Statement: Our project represents the narrative of Lord Rama and Sita's return home after Rama's conquest over the demon king Ravana. This is one version of the story of Diwali, which is the festival of lights. We decided to incorporate this theme into our project by making a light box to tell the story of Diwali. The box design itself incorporates design elements from Hindu temples and pooja stands. Within the box, we have four layers of balsa wood made to depict Lord Rama and Sita's triumphant return in a chariot, which is celebrated with the lighting of diyas. Holes in the balsa wood that line the pathway represent diyas and a neopixel strip behind the balsa wood layer flickers to represent the light coming from the diyas. To achieve the effect of fire, we randomized the brightness of each of the pixels behind the pathway. Pixels not behind the path are a collection of static colors that flow to convey the joyousness of the event. Initially, this scenery is cover...
Read more

Project 1 Continuation: 3D Printing

Image
 Claws: submitted form to have these printed by makerspace staff Claws turned out great, just needed some sanding Intended to be a press fit, but some sizing was off - likely a measurement error on my part Printed rings with loops, but did not end up using them as they didn't fit properly Printed rings next to mannequin hand Armor: printed with Alyssa to learn how to print onto fabric Alyssa helped me print the sample, but I managed to print the piece I used on my own - very excited about the possibilities of printing on fabric! Designed a scale configuration, but didn't end up using, as the configuration was larger than the print bed available (8"x8") Print took 10 hours, was picked up this morning Printed 3 layers, then paused the print to put the fabric down with tape, then restarted the print and just let it run Ran into issues with the fabric being pulled to the side so that it didn't reach one row of scales - attempted to patch with more fabric, worked with ...
Read more

Project 3 Result!

 Video: Project Statement: For this project, I was inspired by the inflatable tube guys, often seen in car lots. Since this was a project where we wanted to display an emotion when triggered by a sensor, I thought a good way to do this would be to have a stationary being that would show happiness when someone gets close. One way to do this would be to have a fan turn on, causing the inflatable tube to start billowing, but I did not want to introduce a fan or a sewing project into such a short project, so I thought servos could be used to emulate the motion by raising and waving the being's arms near its head when triggered by the proximity sensor. I had also planned to have a changing face, but based on the way I had already built the arms made me rethink its design from two faces that switch places to a happy mouth moving to cover a sad mouth when someone gets close. During the critique session, I was given the idea to have had the face rotate upright to switch the faces rather th...
Read more